Do You Need To Wash Wood After Sanding
You will need a hand brush to clean the dust.
Do you need to wash wood after sanding. After a deep power washing the wood fibers of the various components of the deck often raise as they expand with water. Some homeowners will want to rent a big. In order to remove the last remnants of the old finish then you must use a medium grit sandpaper.
Power-washing a deck effectively gets it ready for refinishing but the force of the water leaves the wood fuzzy. Once dry these wood fibers can often remain raised and may cause splinters. Use the low power setting to avoid damaging the wood.
By sanding before applying a fresh coat of stain you are ensuring the stain will adhere to the wood well and last for years before needing a new coat. You can knock down the fuzz by sanding -- as long as you wait for the wood to dry. One may also ask is Deck Cleaner necessary.
Instead use a tack cloth a sticky piece of cheesecloth made especially for this purpose. You then need to follow it with a fine grit sandpaper. If you seek a perfect finish make sure the tack cloth glides smoothly over the wood as you wipe.
Water spots or stains may also form on the surface. Sanded hardwood floor lacks a protective layer and therefore you cannot use water or liquid cleaner on it. Dry rags or brushes arent the most effective tools for removing dust.
To answer your direct question no you dont need to clean the deck if all the wood is sanded down to raw wood. I would power wash the deck then sand it lightly to smooth out any fuzz. After you have done that final light polishing you can begin the cleaning process.