How Do You Prepare Varnished Wood For Chalk Paint

Lightly sand all the wood trim using a 220 grit sandpaper.

How do you prepare varnished wood for chalk paint. Remove the damp cloth immediately after you cleaned the varnished wood. In the past you would use eggshell or gloss paints which would need priming and then another couple more coats. Then let it dry and do it again.

The good news is yes you can paint over varnished wood. Painting furniture is not new but in the past it wasnt as simple as applying one coat of Annie Sloan Chalk Paint. To eliminate these problems seal it with a coat of shellac first and then use your chalk paint.

To remove the veneer pull off the loose sections. Then place a damp towel over the remaining sections. For hard-to-remove spots try wiping them down with trisodium phosphate TSP.

If its really stubborn you can use a hot iron over the damp towel to steam it and loosen the glue. Just spray paint ALL of it. The varnish is not water-proof so avoid extending the interaction time between the wood and wet rag.

I devised my own chalk paint by mixing plaster of Paris with emulsion and it makes a thicker paint that can be applied to unprepared wood surfaces and it co. Let it hang out for a bit and it will help loosen the glue. Dust it off and scrub off any sticky grease stains debris old furniture polish or residual until you see they are entirely removed.

For stubborn dirt and grease use warm soapy water but avoid harsh chemicals. Vacuum up as much of the dust from sanding as possible. For shiny laminates use a sanding pad and lightly sand the surface.