How Do You Prepare Woodwork For Painting

This will ensure all dust and any particles left behind from moving the furniture away from the walls will be collected.

How do you prepare woodwork for painting. Once its dry use a piece of 180grit sandpaper to rub the area back to a smooth finish. Watch our step-by-step video showing how to prepare interior woodwork for decorating with expert advice and top tips to help you complete the job with confi. Be sure to sand away any wood.

An undercoat is always a good idea on previously painted surfaces as it will give you a much better finish and stops the paint dragging on the surface. This painting technique needs to prepare the wooden surface first. Apply two or three coats and make sure you leave plenty of time between each painting on half dried tacky gloss will spoil the end result.

Sand gently only to create a grip on the surface to be painted. The light scuffing action will produce a more textured surface that promotes proper paint adhesion. This helps to seal the wood and prevents discolouration.

Clean thoroughly with sugar soap sand down with a fine paper to give a key for the new paint and then apply your paint. Be a bit careful if your current paint is a glossy or silk finish. For previously painted walls take a look for any lumps and bumps or flaking paint areas.

Lightly coat the wood with your solution three times waiting half an hour between each coat to allow the wood to dry. As long as you prepare youll be able to paint. Dont completely remove the paint.

Sweep an orbit sander over the wood in wide circular strokes. Paintwork with only a few light blemishes can be prepared by sanding. When the sanding is complete youll need to get rid of any bits of dust stuck to the woodwork.