How To Clean Bare Wood For Painting

When youre satisfied with the woods.

How to clean bare wood for painting. Exterior unfinished wood vs. John Burbidge author of the book Watching Paint Dry shows how to properly prime bare wood prior to painting. The wood surface should be prepared by sanding it cleaning it and applying a primer before painting the wood and the latex paint should be sealed with a topcoat to ensure the longevity of the paint job afterward.

Allow the wood to dry for two hours and then apply an additional coat if you can see the primer showing through. Wipe down the wood again thoroughly to dry off all the areas you cleaned. Brush with the wood grain -- as if you were painting it -- to avoid creating visible dust streaks.

Apply a coat of Rustoleum oil-based paint to the primed wood using the cleaned paintbrush. It is the primary tool to clean the woodwork. There are few steps to follow to ready the wood for painting once you are done with sanding.

Step 2 Wipe down the wood with a damp cloth to remove surface scuffs and other dirt you cant brush away. Using a paint roller instead of a brush will contribute to a smoother finish. To clean your hardware it may be easiest to remove it this will also make painting a smoother process.

An undercoat is always a good idea on previously painted surfaces as it will give you a much better finish and stops the paint dragging on the surface. Apply the primer in a thick even layer. Make sure you use primer specifically designed for your wood project interior vs.

The hand brush will get rid of rough pieces and bits. Clean Unvarnished Wood. Use a palm sander or a random orbital sander to quickly strip away imperfections and previous layers of stain to reveal the underlying natural wood.