How To Clean Iron Fireplace Tools

Begin by removing dust and loose soot and dirt with wet paper towels.

How to clean iron fireplace tools. How to Clean Cast Iron Tools The fireplace tools used to reposition burning logs in the fireplace inevitably get covered in soot. After removing the grime apply a polish to bring back the luster of your tools. Start off with a wire brush to remove surface dirt and rust.

Dampen a cotton cloth with a few drops of mineral spirits and wipe down the. If there is rusting then you can use steel wool. Wipe with methylated spirit and a cloth If any dirt is clinging to the iron put a little methylated spirit on a cloth and use it to wipe down the grate.

Wipe down with vinegar again and let it dry fully. Regular Cleaning Maintenance It is recommended you lightly dust over the fireplace with a lint free cloth to remove all dust before any maintenance. 2 Take off any rust with half a raw white potato and a bit of baking.

Next wipe down with white vinegar which helps kill the spores that cause the rust. The Grate and Fireplace Tools The grate is usually made from cast iron and can accumulate a buildup of creosote tars or sap from burning green wood. Sweep the entire surface of your cast iron fireplace vigorously with a wire brush to get rid of any remaining debris.

Dip the steel wool in vegetable oil and rub it gently on the surface. Sprinkle an abrasive cleanser on the surface and scrub with a stiff-bristle brush or steel-wool soap pad. How to Carefully Remove a Heavy Fireplace Insert from Your FireplaceNo Mess and Without AshhttpyoutubenT6yS9HDv3MFireplace inserts a.

This will remove fine dust. Rub the iron paste in using the small brush or cloth and allow the paste to dry for 4 hours. In order to keep your wrought iron fireplace tools in the best shape you must learn to clean wrought iron properly.