How To Make A Desk Lamp

Case in point creative desk lamps.

How to make a desk lamp. Dino Sanchez Table Lamp Kit. You should be able to fit the nut on the top side of the switch. 25 3 square 14 birch plywood.

Next use a ½ forstner bit starting in the middle of the hole created with the 1-¼ forstner bit and drill through the remainder of the board. You must place one on each side and use two screws to fix them. Then I marked out a rectangle 125in by 14in Second.

Cut plywood into 3 squares need 24 total. To make the base glue and screw two 8 in. After drilling the hole test fit the toggle switch to see if it fits.

I made a marked 3-inch from each corner. Wood pieces aligned with the end of the wood. Do not go all the way through.

Cut out the shape with a jigsaw or a bandsaw. I used a small sheet of 34-inch oak plywood. On in the first wood and a second next to the base.

Take a bottle paint it and make a unique lamp from it. Hanging light bulb socket. Then used a paint can or a round object to create an arch in the corner.