How To Make Your Own Hammer Handle

Linseed or Tung oil or other finish.

How to make your own hammer handle. Build Your Custom Martinez Titanium Hammer. You only need a few item to make a hammer handle. As the damage is cleared we put aside some logs to make tool handles and other things.

Tapping the squared-off part of the fawns foot should pull the axe head onto the handle. After sanding down the rough shape I moved over to hand sanding the handle down to 220 grit. Fullering Making a groove in a piece of steel with a fuller.

You can also make your own steel-handle hammers using molds handles and lead hammermetal all sold separately. IME if the slot extends to near the bottom of the hammer head the handle will break as you described. Tap the nail lightly until the nail has sunk into the wood enough that it can stand on its own.

The hammer handle-making process has been perfected over hundreds of years. Choose between M1 M4 and M79 head designs. Oak is not the best wood and some oaks are better than others.

Remember inside surface of hook to inside surface of hook should be 10 inches because wires are measured inside of loop to inside of loop. Sandpaper 80 and 150 grit. 1 Make a decision on the length and diameter the handle is to have.

Auger out enough wood from the hole in the hammer or axe head and the entire handle will come out. A C-clamp and thumb screw hold the mold together until the metal has set. Scarf The end of a piece of metal which has been prepared.