How To Prep Wood After Sanding
If you still have paint or varnish remaining on your wooden project you can repeat the stripping process and again use mineral spirits and steel wool to.
How to prep wood after sanding. Once youre done sanding make sure youve gotten rid of ALL the sanding dust before you do anything else. Watch cabinetmaker Steve Maxwell explain the method he uses for prepping wood for a flawless finish. Use a good vacuum and then a tack rag to wipe the surface clean of any contaminants.
Pour the mineral spirits over the stripped area and use the steel wool to wipe away any remaining stripper residue be sure to follow the wood grain. Optional pre-wetting of the wood when using waterbased finishes. When using Water Based Pre-Stain Wood Conditioner allow it to penetrate for 1-5 minutes then remove any excess.
After they dry put the hardware in a cardboard box to spray. Choosing a pre-stain wood conditioner is simple. Sanding is critical t.
Or if you want to recycle and re-stain an old piece. While blowing the dust off with compressed air removes the dust it also mixes it into the air so some of it can settle back onto the surface and so you can breath it. Allow the primer to dry overnight for best results.
After you have cleaned the wood with a damp rag following the sanding process it is time to prep the wood for stain. Allow the dampened wood to dry 30 minutes before the final sanding. Pound-in any protruding nail heads.
Its best to use wet and dry fine-grit sandpaper if you dont want to bother with how to fix sanding marks after staining. If you plan on using a water-based stain use Minwax Water Based Pre-Stain Wood Conditioner. New coat prep you can sand after staining to rough the surface in preparation for applying a new coat.