How To Work With Reclaimed Wood
Use a hand sander to sand all sides of the wood.
How to work with reclaimed wood. Cracks loose knots and rotten wood. Tape measure Sharpie or. Look for problem areas.
Reclaimed wood is wood that has already served a certain purpose but then then retrieved from its original purpose and reused or repurposed for something else. You may not want to plane those boards. In order to handle the above situation you need to get the wood close in dimensions that are close to your requirements and it need to be surface plan according to certain size.
Find the place where you will dry the wood it needs to be semi-level and relatively clean. It has history a story you can tell from time to time whenever you have someone around in your home. From Doodlecraft Blog Continue to 9.
You can also use a high-pressure water sprayer but youll need to be extra careful or you could damage the grain. Remove all nails screws staples rocks. Use a nylon bristle brush and run it all over the reclaimed wood to remove excess dirt dead bugs or any other unwanted materials.
An air hose is a great way to get rid of smaller particles that might still be clinging to the wood. Reclaimed Wood Lamp with Himmeli Shade. Lightly sand the entire board using heavier-grit 80- to 100- sandpaper to remove splinters but keep the patina.
If there is a nail or staple in your wood it will damage the blades and you will have to buy new ones. When cutting and assembling remember that the interesting part of the wood is. Visually inspect the wood.