Way To Cut Wood Without Power Tools

A simple plastic box and a hand saw are all you need to get started.

Way to cut wood without power tools. To cut the pieces use a miter box saw which clamps the lumber into place and has guides that ensure you are cutting to the exact 45-degree angle that you need. Proper care has to be taken to keep your saw steady. Even if youve got power tools youll want to add a miter box to your DIY toolkit.

Cut through wood up to 14 inch thick with a utility knife. A reciprocating saw needs to be held in both of your hands when in use. Once you have your line tape along your mark with painters tape so that the line is on the side of the piece of wood that you dont want to keep.

One your tape is in place make your cut along the line with your saw. Luckily theres a cheap and easy way to cut wood without any power tools. The tape holds the wood together so that even the cheapest piece of wood.

It also has a very narrow tip that will follow a straightedge closely. Set the cutting depth so that the bearing runs against the straightedge as shown then trim the rough edge. You should install side guides on the table so that you can move the piece of wood in a straight line.

A 116 overhang should be adequate for most boards. Simply make your cut in two passes instead of one. This is the doorway placement for the bathroom-to-hallway door on the new 14 thick plywood wall which I cut using this method.

Place a Forstner bit in the drill and set the appropriate drill depth stop. Because of its shape a reciprocating saw can often be used to make cuts in places that other power tools would be not able to accomplish. As with jointing on the tablesaw one edge of the workpiece must overhang the straightedge.