How To Finish Hardwood Floors Without Sanding
Restoring hardwood floor to its original shine may require refinishing and sanding before staining with polyurethane.
How to finish hardwood floors without sanding. The water-based floor sanding helps remove any surface scratches cracks or signs of wear and the wood floor refinishing supplies help finish the wood floors in a rich glossy shine. Sanding your floor first is an important part of the DIY equation if you really want to MAXIMIZE the durability of your floor paint job. Remember to perform your due diligence by finding the right professional to assist you and knowing what kind of finish is on your floor to begin with.
Then you should use a hardwood floor cleanser to make sure you do not damage the wood. Or a little warm water with some liquid soap in it. URETHANE FINISHES Screen and Recoat.
Here are a few tips on how to refinish hardwood floors without sanding. This could be done one of several ways depending on the size of your floor. We cleaned the floor thoroughly with a Hoover Floorm.
The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This process does not require sanding down to raw wood and removing part of the floors. Or a little warm water with some liquid soap in it.
How To Paint Your Hardwood Floors. You might not have to sand back to bare wood to get them looking good again. This involves scuffing up the finish with a floor buffer and applying a refresher coat.
If it doesnt you wont need to knock down hairs as that is generally done after staining or sometimes sanding you wet the wood to let the grain rise and then sand it down again. Use a finish compatible with the existing finish. Prepare the floor area buff apply your darker stain and seal with a polyurethane sealer varnish or acid-cured finish.