How To Prep And Paint A Bathroom Ceiling

Patch Where Bathroom Ceiling Paint Peeling Had Been.

How to prep and paint a bathroom ceiling. Cut in the edges of the ceiling with a synthetic-bristle brush. The most important thing to know about prepping a bathroom for painting is that the walls and ceiling must be 100 percent dry before starting. This will be a skim coat of sheet rock plaster.

When the chipped paint or paint bubbles are removed the surface will be uneven. Use a latex wall or -- preferably -- ceiling paint. Use an extension pole so you dont have to work from a ladder.

For smooth ceilings use a low nap roller. Roll on a light coat of paint going in one direction and overlapping strokes. Dip the roller in paint frequently and avoid letting the roller dry out.

Prep this the night before if you want a head start. Work in W sections until youve applied your first coat. A good DIY cleaning solution for your bathroom ceiling is three parts water to one part bleach.

Once your bathroom ceiling is clean its time to prime and seal. Apply the first coat of paint with a good quality paintbrush or short nap roller. Use a stepladder to paint a 2-inch to 3-inch cut-line along the edge of the ceiling.

Roll very lightly across the first coat at 90 degrees to. Take a paint roller and paint tray using it to apply your first coat. Remove Chipped Paint The first step in repairing your bathroom walls and ceiling is removing the chipped spots.